Other included items:
1..... 1/8 x 4 x 36 balsa for fuselage sheeting
1..... 3/8 x 3/8 x 12 balsa triangle for firewall and pylon reinforcement
1..... Generation III head kit
1..... Generation III gimbal kit
1..... Du-Bro tail wheel bracket
2..... 4-40 x 12 threaded push rods for pitch and roll
1..... pair pre-bent main landing gear
2..... 3” Du-Bro main landing gear wheels
1..... 1” tail wheel
End of kit contents
Suggested Supplies and Tools
In addition to the normal modelers tools we recommend the following:
Square................ for squaring formers and general usage.
3/32 drill bit........ for reaming gimbal pivot hole.
5/32 drill bit........ for drilling the landing gear torque blocks.
#29 drill bit......... for 8-32 tap.
8-32 tap............... for pylon and tank hatch screws.
End of suggested supplies and tools
Recommended Equipment
Motor – Eflite Power 25 or Power 32
Servos - Hitec HS 225MG for pitch and roll, Hitec Hs 85 for rudder control
Receiver – Spektrum AR6210 used in prototypes
Battery – Gen Ace 3S 4000 mah Li-Po used in prototypes
ESC- Castle Creations Thunderbird 54 used in prototypes
Prop – APC Thin electric 13 x 8.5
Covering - Ultracote
3
