1.Plug the USB charging cable into the mobile phone adopter USB port. Then the
indicator light of charging cable will turn red.
2.Then insert the charging plug of the USB charger correctly into the charging cable
correctly. Then the indicator light of USB will flash green.
3.Charging for about 90 minutes. Then the USB indicator will light green which means
the charging has been finished. Please cut off the connection and move them to the
save place.
List of product configuration and parameters:
Configuration list : Aircraft*1, Remote Control*1, 7.4V lithium-ion battery(built-in)USB
charger*1, The instructions*1, Propeller*4
Battery(Aircraft): 7.4 V 350mA lithium batteries
Remote control radius：≥30m
Battery(Remote Control): 4 grain of 1.5V AAA battery（another purchase）
Flying Time：5 min
Aircraft Size: 139mm* 139mm* 51mm
Aircraft Weight: 92g
Packing Size: 325* 85* 195 mm
Battery Loading of the transmitter
Remove the battery cover of the transmitter. As the polarity shown in the battery
compartment, please correctly load 4PCS AAA batteries (not included). Then please
load the battery cover.
(Please DO remember to pull the ON/OFF power switch to the OFF position before
charging.)
Caution:
A.When loading the battery, please make sure correct the polarity of the battery and
battery compartment. Please DO NOT load the batteries upside down.
B.Please DO NOT mix the old batteries with the new ones or batteries of different
types.
Charging Instruction of the lithium battery
