Copy Right 2014 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED
V1.1
The page 42 of 79
Revision time: 2014-12-04
Field Name
Description
WPS Setting
If or not enable WPS function
WPS
Summary
Display the current status of WPS, including current state,
SSSID name, authentication methods, encryption type and the
PIN code of this AP.
Generate
Generate a new PIN code
Reset OOB
G702 uses default security policy to allow other non-WPS
users to access and apply.
WPS Mode
PIN
：
Enter the PIN code of the wireless device which
accesses to this LAN in the following option, and press apply.
Then G702 begins to send signals, turn on the PIN accessing
method on the clients, and then it can access the wireless AP
automatically.
PBC
：
There are two ways to start PCB mode, user can press
the PCB button directly on the device, or select PCB mode on
the software and apply. Users can activate WPS connection in
WPS mode through these two methods, only when the clients
choose PCB access, the clients can connect the AP
automatically.
WPS Status
WPS shows status in three ways:
WSC: Idle
WSC: Start WSC Process(begin to send messages)
WSC: Success; this means clients have accessed the AP
successfully, WPS connects well.
