Copy Right 2017 All Rights Reserved by FLYINGVOICE TECHNOLOG LIMITED
V1.0
The page 58 of 78
Revision time: 2017-06-16 15:00
2.
2.
Adding
Adding
one
one
dial
dial
plan:
plan:
Step 1. Enable Dial Plan
Step 2. Click
Add
button, and the configuration table
Step 3. Fill in the value of parameters.
Step 4.Press
OK
button to end configuration.
Step 5. Press
Save
button to save changes
3.
3.
Dial
Dial
Plan
Plan
Syntactic
Syntactic
No.
String
Description
1
0 1 2 3 4 5 6 7 8 9 * # Legal characters
2
x
Lowercase letter x stands for one legal character
3
[sequence]
To match one character form sequence.
For example:
6.
[0-9]: match one digit form 0 to 9
7.
[23-5*]: match one character from 2 or 3 or 4 or 5 or *
4
x.
Match to , , ,
…...
For example:
“01.”:can match ”0”, “01”, “011”, ”0111”, …….., ”01111…”
5
<dialed:substituted>
Replace dialed with substituted.
For example
：
<8:1650>123456
：
input is “85551212”, output is“16505551212”
6
x,y
Make outside dial tone after dialing “x”, stop until dialing character “y”
For example
：
“9,1xxxxxxxxxx”:the device reports dial tone after inputting “9”, stops
tone until inputting “1”
“9,8,010x”: make outside dial tone after inputting “9”, stop tone until
inputting “0”
7
T
Set the delayed time.
For example:
“<9:111>T2”: The device will dial out the matched number “111” after 2
seconds.
All manuals and user guides at all-guides.com
