APX9102 User Manual
63
FXS Honor Mode:
This option allows the user to determine if they would like Opermode characteristics applied to trunk (FXO) modules only, or both
trunk (FXO) and station (FXS) modules. If no user choice is specified, the default is 'apply opermode to fxo modules only .
Boost Ringer:
This option allows the user to define whether they require normal ringing voltage (40V) or maximum ringing voltage (89V) for analog
phones attached to station (FXS) modules. If no user choice is specified, the default is 'normal'.
Low Power:
This option, generally used in conjunction with the Fas t Ringer option, allows the user to set the peak voltage during Fast Ringer operation
to 50V. If no user choice is specified, the default is normal.
Fast Ringer:
This option, sometimes used in conjunction with the Low Power option, allows the user to incr ease the ringing speed to 25Hz. If no user
choice is specified, the default is 'normal'.
Ring Detect:
This option allows the user to choose from normal ring detection, or a <i>full wave</i> detection to prevent false ring detec tion for lines
where Caller ID is sent before the first ring and proceeded by a polarity reversal, as in the UK. If no user choice is specified, the defa ult is 'standard'.";
MW I Mode:
This option allows the user to specify the type of Message Waiting Indicator detection to be done o n trunk (FXO) interfaces. The options are
'none' which performs no detection; 'FSK' which performs Frequency Shift Key detection ; or 'NEON' which performs Neon MWI de tection. If no user
choice is specified, the default is 'none'.
ETSI-DTMF:
if the type of CID is etsi dtmf,the value should be yes .
Notice: Hover on the (i) and you can see the comment of every settings.
5.1.5
Trunks
Trunks are used to make outbound call to the real world. There are different trunks we can set here.
There are eight FXO ports on APX9102, user can set eight analog trunks in this setting page, or user can add several ports in a group to set an analog
trunk.
Click “Edit” to edit the current analog trunk, click “Delete” to remove the corresponding Trunk.
Click “New Analog Trunk” to add a new analog trunk, user can add only one FXO port or several ports in a trunk; and input the name of the trunk in Trunk
Name option, then click “Add” to save the settings, or click “Cancel” to cancel the settings. And the existed trunk will be displayed in Groups Module.
