Handle Pump Information and Service Functions
Handle Pump Information and Service Functions
Topics in this
Section
This section contains the following topics:
• Handle Pump Information and Service Functions Using the Web Tool
• Set Service Interval Using the Operator Panel
Handle Pump Information and Service Functions Using the Web Tool
Make Changes
to Data Plate
Information
The data plate has one
fi
xed part (original factory information) and one editable part. If
changes are made to the pump that effect data plate info, it is possible to make additions
in the Custom
fi
eld.
Follow these steps to make changes to data plate information:
1.
Click Setup – Pump info – Data plate.
Result:
The Data plate window is opened.
2.
• Enter additional data plate information in the Custom text
fi
eld.
• Click Update.
Result:
”File saved!” is displayed.
3.
Click OK.
Result:
The data plate info of the base unit is now updated. The changes will
be copied to the pump memory during the next automatic synchronization (every
2 hours).
135
