Preserve, Upload and Delete Measurement Data
7.
Click Setup — Pump info — Pump memory.
8.
In the Manual pump memory synchronization
fi
eld, select
Copy all from MAS to
pump memory
and click Copy.
Result:
”Do you want to perform the synchronization?” is displayed.
9.
Click OK.
Result:
”Synchronization OK!” con
fi
rms when the synchronization is performed.
Preserve, Upload and Delete Measurement Data
Reasons for
Saving or
Deleting Data
and Settings
This section deals with how to save valuable measurement data and how to reset the
system for a fresh start. There are several reasons to save measurement data and
settings:
• Backup in case a base unit is broken and needs to be replaced.
• Troubleshooting — data and settings can be sent for analysis.
• Demonstration and training purposes — interesting application cases can be
demonstrated.
• Research and development feedback.
In case the system is set up to monitor a new pump you may wish to
• preserve data associated with the pump taken out of operation
• delete all measurement data, histograms and counters in the used system to start
fresh.
130
