Settings with the Operator Panel,
Check and Change the IP Address
Check and Change the IP Address
Instruction
Follow these steps to check and change the IP address:
Step
Action
Result
1
• Go to menu Ethernet IP address
(2.5.16) in the Setup menu using
up/down arrow.
• Check that the IP address is
the same as in the web browser
address
fi
eld.
2
To change the IP address, press OK
to enter edit mode and menu 2.5.16.1.
The text is
fl
ashing.
3
• Change the
fi
rst position of the IP
address using up/down arrow.
• Go to the next position using
down arrow and change to the
desired IP address.
• Press OK.
4
Press OK to con
fi
rm the change.
“Value saved” is displayed brie
fl
y and
then menu Ethernet IP address again.
5
If the IP address is changed, restart
the base unit by disconnecting the
power supply brie
fl
y.
107
