Flight Speed
TM
Extended Range Battery
Instruction Sheet
Model #AC810
Compatibility: Flyer
TM
L885
WARNING! TO PREVENT FIRE, EXPLOSIONS, OR ELECTRIC SHOCK:
• Before using the battery read all instructions and cautionary markings on the charger and battery pack.
• Only use the specified Flyer™ charger to charge this battery. Do not attempt to charge with any other chargers. Replacement chargers are available to
purchase exclusively at flyer.radioflyer.com or by calling Radio Flyer Customer Service at 1-800-621-7613.
• Do not store the battery in locations where the temperature is below 14°F (-10°C) or above 104°F (40°C)
• Do not charge the battery in temperatures below 32°F (0°C) or above 104°F (40°C) as it will cause damage to the battery pack.
• Do not operate the charger or battery if it has been impacted, dropped, or damaged in any way.
• Do not use if the power cord is frayed, has broken insulation, or any other signs of damage.
• If the plastic on the battery breaks or cracks, stop use and call Radio Flyer Customer Service.
• Examine the charger and battery before each use and replace if wear or damage is found.
• Do not incinerate the battery pack. The battery can explode in a fire.
• Never attempt to open or disassemble the battery pack or charger for any reason. Do not puncture the battery.
• To prevent electric shock, do not immerse the charger or battery in water. Do not attempt to charge if the cord or power adapter is wet.
• To clean, remove the charger/battery plug from the outlet and wipe with a dry cloth.
• During charging, the battery must be placed in a dry ventilated area.
• Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive heat. Place the charger away from any
heat sources.
• The charger is designed to operate on a standard household electrical power (110/120 VDC). Do not attempt to use the charger on any other voltage level.
• To reduce the risk of fire, connect only to a circuit provided with 15 amperes maximum branch circuit overcurrent protection in accordance with the
National Electrical Code, ANSI/NFPA 70.
• When charging is complete, disconnect the charger from the wall outlet and the battery.
• Place the battery and charger in a place out of reach from children.
• To increase battery life, recharge after every use.
• To maintain battery life, you must charge every 6 months.
Battery and Charger Safety Warnings
Assembly
The following steps provide a general overview of the assembly process for your Flight Speed
TM
Extended
Range Battery. Visit
flyer.radioflyer.com
or contact
for additional assistance
assembling, using, repairing or maintaining your battery pack.
Tools
Unpack Your Battery
4mm Allen Wrench
1
4
Remove the battery pack from the outer carton and discard
all protective packaging. Verify that you have all of the
components listed below. Contact Radio Flyer Customer
Service if any components are missing.
Flight Speed
TM
Extended Range Battery Pack
Battery
Dock
Keys
M5 x12mm Attachment Screws
A
B
Selecting Power Source with Dual Battery System
Checking Battery Charge Level via Integrated LED Indicator
When the extended range battery pack is installed and sufficiently charged, the bike will utilize this battery as the primary
power source. The icon near the battery life indicator on the display will show “B2” to indicate that the extended range
battery pack is being used. Once the power of the extended range battery pack is exhausted, you can change the power
source of the bike to the main battery pack by double-clicking the power button. The battery icon on the display will show
“B1” to indicate that the main battery pack is now being used. At any time you can toggle between the batteries to change
the power source or to check the battery level by double-clicking the power button.
A. Locate the battery life indicator on the side of the battery pack.
B. Push the button on the battery fuel gauge. Fuel gauge LEDs will light up corresponding to the level of charge in the battery pack.
• Always remove the battery from the eBike before transporting the bicycle
on a vehicle bike rack.
• The eBike should be stored indoors when not in use. Failure to do so may
cause additional wear on the eBike, which is not covered under warranty.
• Store the battery in a dry location.
• If the eBike will not be used for an extended period, do not store the
battery installed in the eBike.
• To maintain battery life, you must charge every 6 months.
• When not using the battery for an extended period, charge the battery to
at least 75%.
• Do not store the battery in locations where the temperature is below 14°F
(-10°C) or above 104°F (40°C)
• Keep battery and charger in a dry place out of reach of children.
• Recycle battery and charger in an environmentally friendly manner.
• Do not dispose of your battery in a fire as the battery may catch fire
or explode.
• Do not dispose of your battery in your regular household trash. The
incineration, landfilling, or mixing of batteries with household trash is
prohibited by law in most areas.
• Return an exhausted battery to a federal or state approved recycler.
Contact your local waste management officials for other information
regarding the environmentally sound collection, recycling, and disposal
of batteries.
Moving & Storing
Warranty
Battery Recycling
The full warranty policy is available at
https://flyer.radioflyer.com/warranty-policy
. If you have questions regarding the warranty policy or to initiate a
warranty claim, please contact the Radio Flyer Customer Service team by email at [email protected] or by phone at 1-800-621-7613.
