background image

FUZHOU CANWELL IMPORT & EXPORT CO., LTD.       

 

 
 

 

Tel:0086-591-87610093, 87614264  Fax:0086-591-83640189,87279269  E-mail:[email protected] 

 

 

8.  Power on/ off 

 

8.1 The device will power on automatically when connected to power. 

During normal operation, red power LED flashes, while blue GPS LED 

and green GSM LED keep lighting. During signal searching process, GPS 

or GSM LED will flash. If there is no light presenting on LEDs, the 

device is not working normally.installation, please make sure the 

receiving side face is up, with no metal object above the device to 

interfere with GPS reception. The following places are suggested for 

installation: 

8.2    The device will power off after power is disconnected. 

 

9.  Side key function 

At normal-work indication status, press the side key, all the three LEDs 

will extinguish and then the device will enter covert working mode. Press 

the key again, the three LEDs will go back to normal-work indication 

status. 

 

10.  Troubleshooting 

10.1    If GPS can not receive the signals normally, please drive to the 

open areas for positioning. Generally, it needs 1-2 minutes to receive the 

first coordinates. If the data can not be received after 2-3 minutes, please 

Summary of Contents for TK02A











Reviews: