6
YOUR VISTA-II STABILIZER ARM & VEST
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Bearing Maintenance
If after some period of time the bearings stop running smoothly as when new, you can oil it with light
lubricating oil. We recommend using only a few drops, anything more than a little will end up dripping
from bearing and onto the rest of your Arm. Be sure to keep the oil away from your Camera, and clean up
any over-spill when done.
Cleaning
Do not use solvents or harsh cleaners of any kind on Vista-II Arm & Vest. If the unit becomes dirty, use
only a cloth or sponge with water and a very mild detergent to gently rub the unit clean. Rinse well.
Storage
If you are going to store Flycam Vista-II Arm & Vest for a long period of time, then we recommend storing
it up-right in a dry or low-to-normal humidity area.
If you are unable to find an environment like this, then we suggest you store the unit in an airtight plastic
container or bag. Keeping the unit upright helps to lessen stress on the system.
Maintenance
