7
Remove the Head plate from the 3-piece
head assembly in preparation to attach
it to your camera. You will note a
number of mounting holes that can be
used to adapt to various cameras.
Center the Head Plate on the camera and secure it properly. Do not over tighten this
adjustment as it can break the threaded insert.
Align the camera center of balance to the mid plate and secure.
Should you wish to bypass the quick release plate, the camera can be directly attached to the
Head Plate by using following assembly sequence:
The many slots located on the head plate and bottom plate allow you to easily adjust the X &
Y axis for perfect balance. Once achieved, tighten the knobs to secure. Further ‘fine tuning’
will probably be required.
Head Plate X adjustment