3
•
Loosen both the knobs of the Height
Adjustment Bracket.
•
Loosen the knob of the Roll Axis Handle, then
insert it in the Adjustment Bracket by aligning
them together.
•
Insert the Adjustment Bracket into the rods of
the Dovetail Base by aligning the holes, as
shown in the image.
•
After positioning the Adjustment Bracket and
the Dovetail Base parallel to each other,
tighten & secure them via both the knobs.
•
Similarly, follow the same process to attach
the other Adjustment Bracket with dovetail
base.
•
Tighten the knob after inserting the handle
into the Adjustment Bracket.
NOTE:
You can adjust the position of the handle
according to you requirements.
Height
Adjustment Bracket Assembly
Roll Axis Handle Assembly
