FLYBOX
General Suggestions
REV 1.0
38
®
APR1
-
User Manual,
Safety Instructions and Warning Booklet
The
CSPD
mode requires the pilot to manually select the
target RPM for each phase of the flight, e.g. after takeoff
you will need to reduce the MAP and then reduce the
RPM. If you continue the climb you will need to set the
RPM to perform at best considering the MAP you want to
keep, also depending on the limits given by the engine
manufacturer.
For this reason, it is important that if you are not yet an
expert in manual RPM and MAP power settings, you train
with an instructor. By following his advice you will learn in
a short time.
The basic rule is:
- If you need to increase power, increase RPM first and
then MAP.
- If you need to reduce power, decrease MAP first and
then reduce revs.
All this, of course, must be done within the limits declared
by the engine manufacturer.
This is just a general recommendation that may not work
for you, so please be aware that we do not take any
responsibility.
