In META page PM, please click
RX Path Loss Setting
into
AGC PATH LOSS
setting page. Click
Upload from flash
button to read the RX path loss parameter form the mobile. If you have not loaded
the correct database file yet, META will notice you to open a database. Please follow it and then you
will see the target RX path loss parameters for different channels in the
AGC path loss
window.
Please note that all the RX loss values should be in the tolerance range of
+
/
-
5dB, otherwise it
Should be a hardware failure.
Summary of Contents for EZZY
