Identification: POH_SS_LSA Rev.0
Page: 57 of 71
Date: 11/10/07
Issued: M. Fiorindo
Verified: M. Fiorindo
Approved: C. Pinzana
Revision Description:
New manual issue
Pilot Operating Handbook and
Training Manual
FLY SYNTHESIS
STORCH S 500 LSA
(for Rotax 912 UL and
Jabiru 2200 engines versions
)
Provincial Road n.78 Km 12.150
33050 Mortegliano (UD) – Italy
Tel. +39.(0)432.992482 – +39.(0)432.993557
Fax +39.(0)432.931280
Sito web:
www.flysynthesis.com
e-mail:
Empennage (VIII)
Vertical fin
absence of buckling, absence of delaminations, check all rivets
Rudder
absence of delaminations, hinges fixed correctly
Lower the tail of the aircraft to lift the nose wheel, check the free movement of the rudder, any problem on the
hinge.
Bowden cables
fixed correctly.
Stabilator
free movement during all travel range, absence of buckling, absence of delaminations
Stabilator hinge
absence of delaminations, fixed correctly, no play
Balancing mass
fixed, no play
Hinge pins
fixed correctly
Empennage (IX)
Trim tab
free movement, absence of defects, no play.
Stabilator trailing edge absence of delaminations
Fusolage: tail beam (X)
Repeat point (VII)
Left main landing gear (XI)
Repeat point (VI)
Left wing: rearward side (XII)
Repeat point (V)
Left wing: forward side (XIII)
Repeat point (IV)
Check inside cabin (XIV)
Instruments panel
fixed correctly, all placards
Master switch ON
all instruments ON
Master switch OFF
all instruments OFF
Control Stick
free movement, fixed correctly in its support
Rudder pedals no distorsion, no signs of cracks, correct functionality, fixed correctly in its support, correct
functionality of centring system.
Throttle & choke levers
free movement, fixed correctly in the support
Brake lever and parking brake Remove parking brake lock, check lever functionality. Insert parking brake.
Trim lever
check correct functionality
Safety belts
check correct functionality
Seats
fixed correctly.
Windshield
clean, fixed correctly on fusolage
Doors
clean, fixed correctly on fusolage, check locking system
Luggage
secured.
Weight&balance
calculated.