install
instruction
PAGE 1 of 4
Install-View | 2020-03
All rights reserved. © Fluxwerx Illumination 2020 604.549.9379 | fl uxwerx.com
Due to continuous product improvements, specifi cations and dimensions are subject to change without notice. Certain options have
limited compatibility with some other product selections. Consult www.fl uxwerx.com for most current technical information.
Tools:
• Level
• Sharp Side Cutter
• Measuring
Tool
• Wire Stripper / Knife
• Phillips
Screwdriver
TOOLS REQUIRED
Refer to Driver Enclosure Installation Documents
+ Row Confi guration Document
Install ceiling driver enclosure and aircraft cable suspension per
appropriate ceiling type installation instructions — noting the fi xture
spacing and that the non-power suspension point is NOT the end
suspension point.
1
INSTALL CEILING DRIVER ENCLOSURE
Read Before Beginning Installation:
• Do not join fi xture lengths together on the fl oor and lift into
place. This introduces signifi cant forces on the joins and will
damage the fi xtures.
• All
fi xtures should be installed in accordance with national and
local building and electrical codes.
• Leave the protective bag and care labels on the fi xture during
installation. Warranty is void if labels are removed before
installation is complete.
• Support
fi xtures under the lower rail during handling.
IMPORTANT
HANDLING
Lift from below
Leave bag and
care labels in place
Warranty void if removed
before installation
VIEW SUSPENDED
