153.699UK User Manual
Remote control
1.
POWER
LED on / standby button
2.
MODE+
steps upwards through modes
3.
SPEED-
reduces speed of pattern
4.
COLOR+
steps upwards through colours
5.
COLOR-
steps downwards through colours
6.
DEMO
initiates the demo mode
7.
SPEED+
increases speed of pattern
8.
MODE-
steps downwards through modes
9.
increases brightness
10.
BRIGHT-
decreases brightness
Remove the clear tab from the handheld remote to engage the battery (replacement CR2025 button cell)
To switch LEDs on, press the POWER button (from standby, the last setting is resumed)
If there is no response handset to the controller (see from the handset, it may be necessary to pair the “
Pairing
” below)
To test all LED functions, pressing the DEMO button will initiate a full demo programme
MODE+ and - buttons step through the 19 preset programmes in sequence (shown below)
SPEED+ or - will alter the rate of change in the selected mode
COLOR+ or - will override the pattern mode and step through 20 static colours
or - will change the brightness of the selected colour
Press POWER to enter standby mode (all LEDs off)
Pairing:
If the LED controller does not respond to the RF remote handset, disconnect DC power from the controller.
Reconnect the DC power to the controller and within 5 seconds of powering on, hold down the “SPEED-” and “SPEED+”
buttons simultaneously.
The controller and handset should now be paired and the controller should respond to the handset.
Preset
Name
Description
1 - 2
Scrolls
2 types of scrolls through full spectrum of colours
3
RGB Glow
Fade between fully on and half through Red, Green, Blue
4
7 Colour Glow
Fade between fully on and half through 7 different colours
5 - 10
Static Glows
Glow presets for Blue, Cyan, Green, Red, White
11
RGB Jump
Switch between Red, Green and Blue
12
6 Colour Jump
Switch between 6 different colours
13
RGB Flash
Flash on and off through Red, Green and Blue
14 - 18
Static Strobes
Regular, very short burst for Blue, Cyan, Green, Red, White
19
RGB Strobe
Regular, very short burst through Red, Green, Blue
Specifications
Power supply
5-24Vdc, 12A (to supply 3 x 4A max – 50% duty cycle)
Remote control frequency
433MHz
Lead length (power input)
100mm
Connections
4-pin socket ( / Green / Red / Blue)
Controller dimensions
42 x 13 x 5mm
Weight
4.8g
Errors and omissions excepted.
Copyright© 2014. AVSL Group Ltd.