Flix 12VDC Induction Heater
Quick Start Guide
Flite Quick Start Guide
©Fluxer Heaters LLC, 2020
V1.0
https://www.fluxerheaters.com
Coil Height Adjustment:
Flite’s heating cycle can be altered by raising or lowering the position of the heating coil.
Like other Fluxer Heating devices, the position of the bottom loop of the Flite’s heating coil
relative to the tip of the vapcap is critical to the length of time it takes your vapcap to click.
Raising the bottom loop of the coil
up
, above the position of the vapcap’s tip, will increase
the time it takes the vapcap to click, while lowering it decreases the time to click.
Altering this
distance by as little as 1mm or 2mm can make a noticeable difference in your Dynavap user
experience!
No gap = quickest to click,
In the middle =
Large gap = slowest to click,
the coolest position
typical performance
the hottest position
Adjust the coil using the same procedure described in this video: “Flux Deluxe coil height
adjustment procedure and demo,”
https://youtu.be/QYlfpyd3NHA
YouTube link:
If the coil needs to be re-centered after adjustment, use a Sharpie or similar non-metallic, non-
Dynavap object to reposition the coil relative to the heater. The copper coil wire is soft and
does not require much force to move.
Warranty
: Your Flite includes a 12 month warranty on parts and labor. Please contact
with issues and/or questions.
Thank you for purchasing a Flite portable induction heater from Fluxer Heaters! I hope it
brings you much enjoyment!
Nothing fluxes like a Fluxer!™
