The motor is not explosion-proof.
Do not operate the pump in hazardous locations.
Do not use the pump for flammable liquids.
The motor comprises a built-in overload cut-out switch.
The motor is switched off automatically in case of overloading.
After having cooled down, the motor can be switched on again
by pressing the button on the right side of the motor housing.
Repeated overloading may cause damage to the motor.
Only use the pump for its intended purpose.
Never leave the pump unattended.
The pump has to be stored in a vertical position.
Install the pump in a way which ensures that
it cannot fall into the container.
Only use the pump with a suitable hose.
Ensure that the hose is securely fixed to the hosetail.
Regularly check the hose and connections to ensure
safe operation.
The pump should not be immersed deeper into the
liquid than the outlet connection.
The pump should only be left standing in the liquid
as long as in operation.
Only use the pump up to max. 45°C (PP) or
60°C (PVDF and S) liquid temperature.
Comply with relevant safety instructions.
Wear appropriate protective clothing.
( Face shield, protective gloves, etc. )
.
Never operate the pump dry.
The pump should not be exposed to the weather.
Clean the pump after each operation.
Never store the pump in areas in which corrosive
vapours exist.
Safety instructions
5
