Flux F 570, Translation Of The Original Operating Instructions

Page: 125 / 212

Maintenance and servicing
122 Operating instructions VISCOPOWER
E
N
G
L
IS
H

Make sure that electrical connections are not damaged.

PTFE stators and the rotors are Ex-marked on the front. Only these may be used as
spare parts.

If the Ex symbol is no longer recognisable, the respective parts must be replaced.
11.2 Maintenance schedule
Component Maintenance activity
O-rings Regular visual inspection for wear
O-rings Replace when worn
Mechanical seal Regular visual inspection for wear
Mechanical seal Replace when worn
Mechanical seal Clean after each use
Progressive cavity pump Visual inspection for leakage
Sliding surfaces of the mechanical seal Lubricate after cleaning, before commissioning and after
prolonged standing time (recommended grease: Klüber-
synth UH1 14-151)
Fitting of the mechanical seal on the
shaft Lubricate after cleaning, before commissioning and after
prolonged standing time (recommended grease: Klüber-
synth UH1 14-151)
Coupling Regular visual inspections for wear
Progressive cavity pump Clean after each use
Hose clamps and hose fittings Regularly check for secure fitting
Gearbox Regularly check for ease of movement and absence of
clearance and replace if necessary
Motor flange Check bearings and freewheel regularly for ease of
movement and absence of clearance and replace if
necessary