Fluke Y5735 Instruction Sheet Download Page 2

Page: 2 / 4

Note: Use center row for the
5320A, 730A, 5790A, and
5790B. Use lower row for the
5725A.

Filler Bar

Slide Rail

#8-32 x 1/4”
Panhead (2x)

#8-32 x 3/8”
Flat Phillips Head(4x)

#8-32 x 1/2” Panhead (2x)

Rack Ears (2x)

Figure 1. Attaching Hardware to the Instrument

Threaded Rack Holes use
#10-32 x 1/2” Truss Head Screws

Detail A

Unthreaded Rack Holes use
#10-24 U Nuts and
#10-24 x 1/2” Truss Head Screws

Detail B

#8 Flat Washers,
lock Washer,
and #8 Hex Nuts

Rear Slide

Bracket

Front Slide

Bracket

Mounting Hardware

(#8 steel)

#8-32 x .38 Flat Philips Head (x8)

#8-32 UNC Hex Nut (x8)

#8 Flat Washer (x8)

#8 Lock Washer (x8)

#8-32 x .38 Flat Philips Head

Figure 2. Installing Rack Slides

Summary of Contents for Y5735

Page 1: ...32 x truss head machine screws per bar as Figure 1 shows making sure the first tapped hole closest to the end of the bar is toward the front of the instrument 3 Pull the slide rails out from the rack...

Page 2: ...are to the Instrument Threaded Rack Holes use 10 32 x 1 2 Truss Head Screws Detail A Unthreaded Rack Holes use 10 24 U Nuts and 10 24 x 1 2 Truss Head Screws Detail B 8 Flat Washers lock Washer and 8...

Page 3: ...25 0 625 0 625 0 500 0 625 0 500 0 500 Figure 3 Typical 5725A Mounting Locations Equipment Mounting Rail 5320A 5700A 5730A 5790A 5790B Rack Ear 5320A 5700A 5730A 5790A 5790B Rack Ear Mounting Hole to...

Page 4: ...et 4 Decorative Head 10 32 x 3 4 in U Nut 10 32 Hex Nut 8 Flat Washer 8 Lock Washer 8 U Nut 10 24 8 32 x 38 Flat Philips Head Truss Head 8 32 x 1 4 in Truss Head 10 32 x 1 2 in Truss Head 10 24 x 1 2...