Fluke VT06, User Manual

Page: 20 / 22

VT06/VT08
Users Manual
16
Note
You must have Administrator privileges for your computer to install the software.
3. On the PC, follow the instructions to install the Fluke VT Report software.
4. Restart the PC when installation is complete.
Accessories
See www.fluke.com for a list of accessories available for the Product.
Maintenance
The Product requires minimum maintenance.
Clean the Case
Clean the case with a damp cloth and a weak soap solution. Do not use abrasives, isopropyl
alcohol, or solvents to clean the case.
Lens Care
W
Caution
To prevent damage to the infrared lens:

Carefully clean the infrared lens. The lens has a delicate anti-reflective coating.

Do not clean the lens too vigorously because this can damage the anti-reflective
coating.
To clean the lens:
1. Use a pressurized can of air or a dry nitrogen-ion gun, if available, to blow off the particulates
from the lens surface.
2. Soak a lint-free cloth in a commercial lens cleaning liquid that contains alcohol, ethyl alcohol,
or isopropyl alcohol.
3. Squeeze the cloth to remove excess liquid.
4. Wipe the lens surface in one circular motion and discard the cloth.
5. If needed, repeat with a new lint-free cloth.
Battery Care
To get the best performance from the lithium-ion battery:

Do not charge the Product for more than 24 hours because reduced battery life might result.

Charge the Product for at least 2.5 hours every six months for maximum battery life. Without
use, the battery will self-discharge in approximately six months.