3-12
Measurement - Route
MENU functions in the measurement task selection screen
• Press the MENU key in the task selection screen (see below):
Skip/ Unskip
A measurement task can be skipped if it cannot be measured.
Event / Comment
Enter the event and, if necessary, a supplementary comment to
explain the result. It is also possible to use this entry for skipped
measurements (see P. 3-26).
Break down Multitask
Break down multi-measurement task (see previous section).
Display diagnostic Task
Adaptive measurement tasks contain additional measurement
tasks which are automatically carried out for diagnosis if
a threshold value is exceeded. This function shows these
additional diagnostic measurement tasks.
Task Manager
To check the measurement settings before the measurement, call
up the Task Manager here. The settings cannot be changed.
Display result
The results of a task that has already been carried out can be
displayed. Either the last result saved last or a trend appears (see
also the ‘Show result’ option in the Route Setup, p. 2-15).
Delete result
Delete the measurement result for the selected measurement
task. This procedure cannot be reversed!
Set unmeasured
Change the status of the measurement task to "unmeasured".
Existing results are retained.
MENU functions
in the task selection screen
Summary of Contents for VIB 5.310
Page 1: ...Data Collector Vibration Analyzer VIBXPERT II Users Manual ...
Page 9: ...1 8 Empty page ...
Page 51: ...2 38 Empty page ...