Fluke Versiv, User Manual

Page: 75 / 260

Chapter 3: Certify Coaxial Cabling
Settings for Coaxial Tests
61
Settings for Coaxial Tests
Table 3 gives descriptions of the settings for coaxial tests. To set
up a project, which includes the settings in Table 3, cable IDs, and
operator names, see Chapter 11.
To set up a coaxial test
1
On the home screen, tap the test setup panel.
2
On the
CHANGE TEST
screen, select a coaxial test to change,
then tap
EDIT
.
Or to set up a new coaxial test, tap
NEW TEST
. If no module is
installed, the
MODULE
screen shows. Tap
DSX-5000
CableAnalyzer
.
3
On the
TEST SETUP
screen, tap the panels to change settings
for the test. See Table 3.
4
On the
TEST SETUP
screen, tap
SAVE
when your test setup is
completed.
5
On the
CHANGE TEST
screen, make sure the button next to
the test is selected, then tap
USE SELECTED
.