Fluke Versiv, User Manual

Page: 46 / 260

Versiv Cabling Certification Product Family
Users Manual
32
About the DSX-PLA001 Adapter Modules
The DSX-PLA001 Universal Permanent Link Adapter has an
interchangeable personality module. The module lets you
connect the adapter to different styles of insulation displacement
connectors (IDCs).
Figure 11 shows how to remove and install a personality module.

Caution

To prevent latent or immediate damage caused by
electrostatic discharge and to prevent damage to
the DSP-PMxx personality module and the socket on
the cable:

Before you touch a personality module or
DSX-PLA001 permanent link adapter with no
module attached, touch a grounded, conductive
surface.

Always remove the adapter from the tester before
you change the personality module.

Always keep a personality module attached to the
adapter cable.

Tighten the screw only with your fingers. Do not
tighten too much. Do not use tools to tighten the
screw.

Do not touch the gold contacts on the socket or the
module.

Always keep unused personality modules in their
original, static-protection bags.