Fluke Versiv, User Manual

Page: 236 / 260

Versiv Cabling Certification Product Family
Users Manual
222
How to See the Tester’s MAC Address
Some networks require users to register their device’s MAC
address before they can connect to the network.
There are two MAC addresses: one for the wired port and one for
the Wi-Fi adapter.
To see the tester’s or Wi-Fi adapter’s MAC address
Note
The Wi-Fi adapter’s MAC address is also provided
on the adapter’s package or with the adapter’s
documentation.
1
For a Wi-Fi adapter, connect the adapter to the tester’s USB
port.
2
On the home screen tap
TOOLS
, then tap
Network
.
3
On the
NETWORK
screen, tap the
Wired
or
Wi-Fi panel
. The
MAC addresses shows at the top of the
WIRED
and
WI-FI PORT
screens.
Use LinkWare Live Through a Wired Ethernet
Network
1
Use an appropriate cable to connect the tester’s RJ45 Ethernet
port to an active network port. If the cable is good and the
port is active, the LEDs on the tester’s port will come on.
2
On the home screen, tap the
RESULTS
icon, then tap
TRANSFER
.
3
On the
TRANSFER RESULTS
screen, tap the
LinkWare Live
panel.
When the tester connects to the network, the wired network
connection icon shows at the top of the screen: