Fluke Versiv, User Manual

Page: 21 / 260

Chapter 1: Get Acquainted

Safety Information
7

Caution
To prevent damage to the tester or cables under
test and to prevent data loss:

Keep modules attached to the Versiv units to give
protection to the module connectors.

Do not remove the USB flash drive while the LED on
the drive flashes. Doing so can corrupt the data on
the drive.

You can lose a USB flash drive, cause damage to it,
or accidentally erase the contents of the drive. Thus,
Fluke Networks recommends that you save no more
than one day of test results on a flash drive.
For DSX Modules

Warning

To prevent possible fire, electric shock, or personal
injury:

Do not connect the tester to telephony inputs,
systems, or equipment, including ISDN inputs.
Doing so is a misapplication of this product, which
can cause damage to the tester and make a possible
shock hazard for the user.

Always turn on the tester before you connect it to a
link. Doing so activates the tester’s input protection
circuitry.

Do not operate the Product with covers removed or
the case open. Hazardous voltage exposure is
possible.

Remove the input signals before you clean the
Product.

Do not put metal objects into connectors.