Fluke Versiv, User Manual

Page: 138 / 260

Versiv Cabling Certification Product Family
Users Manual
124
3-6
Save the result:

If
Auto Save
is on, the tester uses the next two IDs to save
the results for the two fibers.

If
Auto Save
is off, tap
SAVE
if the test passed or
FIX
LATER
if the test failed. The
SAVE RESULT
screen shows
the next two IDs available. You can change the IDs if
necessary.
Autotest Results for Smart Remote Mode
Unsaved results show the results for both fibers. See Figure 48.
Fiber IDs for Saved Results in Smart Remote Mode
If
Auto Save
is
On
and the test passed, the tester saves two
records, one for each fiber. The records have the next two IDs in
the ID list.
If you must change the ID for a fiber before you save results, set
Auto Save
to
Off
before you do the test. Then, on the
SAVE
RESULT
screen, tap the
Input Fiber ID
or
Output Fiber ID
window.