Fluke TS 1200, User Manual

Page: 6 / 44

1-2
TS1200 Test Set
Users Guide
General Safety Information
Table 1-1 describes the international electrical symbols used on the Test Set and in this manual.
WX
Warning
Good safety practices prohibit the connection of the TS1200 and
similar test sets to 117 VAC commercial electrical power. Should the
TS1200 Test Set be connected to commercial power, all warranties are
immediately voided.
When connecting to metallic network wires, handle alligator clips by
insulated boots.
Do not use the test set if it is damaged. Before you use the test set,
inspect the case. Look for cracks or missing plastic. Pay particular
attention to the insulation surrounding the connectors.
If this product is used in a manner not specified by the manufacturer,
the protection provided by the product may be impaired.
Registration
Registering your product with Fluke Networks gives you access to valuable information on
product updates, troubleshooting tips, and other support services. To register, fill out the online
registration form on the Fluke Networks website
Table 1-1. International Electrical Symbols
W
Warning: Risk of personal injury. See the manual for details.
Caution: Risk of damage or destruction to equipment or software. See the manual for details.
X
Warning: Risk of electric shock.
.
Earth ground
)
CAN/CSA-C22.2 No. 60950-1-03
CAN/CSA-C22.2 No. 1010.1-92 + CSA-C22.2 No. 1010.1B-97
UL/ANSI 3111-1
~
Do not put products containing circuit boards into the garbage. Dispose of circuits boards in
accordance with local regulations.