Fluke SHAFTALIGN touch, Safety And General Information

Page: 5 / 76

DOC 26.100
en
Handling precautions
The rugged tablet, the sensor and the reflector are precision instru-
ments and should not be dropped or subjected to physical shock.
Storage
Use the provided case to transport the system. If the sensor and
reflector are mounted on standard brackets while within the case,
do not turn the brackets upside down when removing them from the
case. This reduces the risk of the components crashing to the ground
in case that they have not been fastened to the support posts.
If the system is not used for an extended period, the system compo-
nents must be stored in a cool, dry and well-ventilated location.
Observe the storage temperatures specified in the “Safety specifica-
tions” section.
Care
The sensor lens and the rugged tablet display must be kept clean. Use
the supplied lens cleaning cloth. Avoid vigorous polishing to preserve
the anti-reflective coatings of the glass element. The sensor housing
and the rugged computer protective holster may be wiped clean
using a soft cloth dampened with a mild, non-abrasive detergent (use
soapy water with only 1% mild soap in water). The display should be
cleaned using a soft lint-free dry cloth.
Maintenance
Although the system is essentially maintenance-free, the following
points should be observed:
The calibration accuracy of the sensor should be checked every
two years as indicated by the coloured date wheel label affixed
to the back of the housing.
Please return the sensor to your authorized PRÜFTECHNIK
service center for inspection by the indicated date.
Disposal
Any waste electrical and electronics parts of the system including
memory sticks must be disposed of according to applicable safety and
environmental regulations.
Customers in member states of the European Union must adhere
to the EU directive 2002/96/EC on waste electrical and electronic
equipment (WEEE). PRÜFTECHNIK products that fall under this
directive are marked with the shown crossed-out wheelie bin symbol
and must be disposed of according to this directive.
The marked components must be disposed of with
PRÜFTECHNIK or their authorized disposal partners.
If you have any questions regarding the WEEE Directive,
please contact your local PRÜFTECHNIK sales representa-
tive.
sensALIGN 3 sensor approvals
Country-specific radio approvals for sensALIGN 3 sensor may be
obtained from the PRÜFTECHNIK website (www.pruftechnik.com).
CAUTION