Fluke PLS XLD, User Manual

Page: 9 / 14

Laser Detectors
Product Familiarization
5
Control Panel
Table 4 lists the functions of buttons on the control panel.
Table 4. Control Panel
Description Function
Power
Push once to turn on the Product.
Push and hold for
≥
2 seconds to turn off the Product.
Detection accuracy
Push once to view the current detection accuracy setting and units of measure.
Push twice quickly to change the detection accuracy setting. For available
options, see Detection Accuracy .
The detection accuracy numerical value and units of measure briefly show at the top of
the display.
Detection units of
measure
Push + at the same time to change the units of measure. For available
options, see Detection Accuracy .
The detection accuracy numerical value and unit of measure briefly show at the top of
the display.
Beeper volume
With the Product on, push to select the beeper volume. You can select Low , Hi ,
or OFF .
The volume level briefly shows at the top of the display.
shows on the bottom of the display when the beeper volume is set to Low or Hi .
Grade indicator LEDs
Push and hold for
≥
2 seconds to turn on or turn off the grade indicator lights.
All three grade indicator lights flash briefly.
With the grade indicator lights enabled, when the laser beam reception window
detects a laser beam:
The top LED lights when the Detector is too high and needs to be lowered.
The bottom LED lights when the Detector is too low and needs to be raised.
The middle LED lights when the Detector is on grade.