OFSR-X OptiFiber Smart Remote Options
Users Manual
18
Using the Smart Remote as a
Manually-Controlled Optical Source
You can manually-control the smart remote as a source
for loss and power measurements with an OptiFiber
tester or any optical power meter.
To turn on the source, use the button on the fiber
module as described in Figure 7.
•
Hold for 3 seconds (red LED)
DTX-MFM: 850 nm
DTX-SFM: 1310 nm
•
Press again (green LED):
DTX-MFM: 850 nm
DTX-SFM: 1550 nm
•
Press again: OFF
(blinking green LED)
INPUT
port
OUTPUT
port
F2
F3
F4
F5
F1
VIEW
RECORDS
SAVE
FIBER
INSPECTOR
FUNCTIONS
SETUP
TEST
EXIT
ENTER
HELP
O
PTI
F
IBER
TEST
LOW BATTERY
TONE
TALK
FAIL
TEST
PASS
TALK
awl08f.eps
Figure 7. Using the Smart Remote as an Optical Source
