Symbols
The table below is a list of symbols used on the Product or in this document.
Instructions
Safe operation of the Product requires:
• careful transportation
• professional storage and installation
• careful operation and maintenance
Maintenance
With correct use, the Product does not require special maintenance. Repair
should only be done at a Fluke Service Center by trained and qualified
personnel within the guarantee period. See
www.fluke.com
for locations and
contact information of Fluke Service Centers worldwide.
To clean the housing:
1.
Disconnect the Product from the measuring circuit.
2.
Wipe the housing with a damp cloth and mild detergent.
3.
Do not use abrasives or other solvents. No fluid should enter the device.
Symbol
Definition
WARNING - RISK OF DANGER. Consult user documentation.
WARNING. HAZARDOUS VOLTAGE. Risk of electric shock.
Consult user documentation.
Double Insulated
Earth
Conforms to relevant Australian Safety and EMC standards.
Certified by CSA Group to North American safety standards.
Conforms to European Union directives.
Measurement Category III is applicable to test and measuring
circuits connected to the distribution part of the building’s low-
voltage MAINS installation.
Measurement Category IV is applicable to test and measuring
circuits connected at the source of the building’s low-voltage
MAINS installation.
This product complies with the WEEE Directive marking
requirements. The affixed label indicates that you must not
discard this electrical/electronic product in domestic household
waste. Product Category: With reference to the equipment types
in the WEEE Directive Annex I, this product is classed as
category 9 "Monitoring and Control Instrumentation" product. Do
not dispose of this product as unsorted municipal waste.
