Fluke NORMA 6003, User Manual, Page: 43 / 98

Power Analyzer
Operation
37
Item Description
E
Move backward the currently selected item
Moves the currently selected measurement forward by one position in the list. If
the currently selected measurement is already at the end of the list, no action is
taken when the button is pushed.
Note
When you enter the User Item view for the first time, the screen is blank, there are no
measurements in the list. Users can add up to 20 measurements to the list.
The Analyzer can remember the User Item views. Even if the Analyzer is turned off,
the list defined last time will be automatically displayed when you enter the User Item
view next time.
Add Measurement Items
1. From the main screen of Meter select
C
( User Item ) >
B
( Add ).
2. All available measurement items are listed by categories in a tree structure. See
Measurement
Calculation Method
for details of measurement items.
3. Use
A
through
D
to select category.
4. Use the arrow (
M N O P
) keys to move the cursor over the corresponding item.
In most cases, there are 2 dialog boxes displayed in the measurement tree menu, the one on the left
lists measurement items, and the one on the right lists the supported channels or wiring groups. The
yellow block represents the cursor position, and the yellow box indicates the corresponding branch in
the current tree structure.
Note
Under Dual-Unit Interconnection mode, "Remote" option will appear in this menu. See
Dual-Unit Interconnection
for details.
5. Push
]
( Select ) to add the current option to the end of the list.
If the left and right dialogs are displayed, first select the name of the measurement item in the left
dialog box, then select the channel or wiring group to be added in the right dialog box, and finally
push
]
( Select ) to confirm.
6. Repeat step
3
to
5
until all required measurements have been added. Totally up to 20
measurements can be added.
7. Push
Q
( Back ) on the control panel repeatedly to go back to the main screen of Meter.