Fluke MicroScanner 2, User Manual, Page: 48 / 60

MicroScanner
2
Cable Verifier
Users Manual
40
Cleaning
Clean the display with glass cleaner and a soft, lint-free
cloth. Clean the case with a soft cloth dampened with
water or water and a mild soap.

Caution
To avoid damaging the display or the case, do
not use solvents or abrasive cleansers.
Battery Life, Status, and Replacement

Warning

To avoid possible electric shock or personal
injury:

Turn off the tester and disconnect all test leads
before replacing the battery.

Use only the correct type of batteries, properly
installed in the case, to power the tester.
The batteries last for about 20 hours of typical use.
Replace the tester’s batteries when the low battery
indicator (

) appears. See Figure 28.
You can use the following types of AA (IEC LR6) batteries in
the tester:

Alkaline

Lithium

Rechargeable nickel-metal hydride (NiMH)

Rechargeable nickel-cadmium batteries (NiCD)
egk28.eps
Figure 28. Replacing the Tester’s Batteries