MicroScanner
2
Cable Verifier
Users Manual
28
Testing Coaxial Cabling
1
Turn on the tester; then press
to switch to coaxial
test mode (
).
2
Connect the tester and wiremap adapter or ID locator to
the cabling as shown in Figure 18.
For cabling not terminated with an F-connector, use an
adapter or hybrid patch cord to connect to the cabling.
The test runs continuously until you change modes or turn
the tester off.
egk19.eps
Figure 18. Connecting to Coaxial Cabling
Connection to
service
Coaxial patch cords
Wiremap
adapter
Wall
outlet