®
i410/i1010
AC/DC Current Clamp
Instruction Sheet
P
Read First: Safety Information
•
Avoid working alone to ensure that assistance can be rendered.
•
Do not use the clamp if the clamp or leads appear damaged, or if you
suspect that the clamp is not operating properly.
•
Use extreme caution when working around bare conductors or bus
bars. Accidental contact with the conductor could result in electric
shock.
•
Use caution when working with voltages above 30V rms or 60V dc.
Such voltages pose a shock hazard.
•
Never use the clamp on a circuit with a voltage higher than 600V
(CAT. III) or a frequency higher than 400 Hz (i410) or 2 kHz (i1010.)
The clamp may be damaged if these limits are exceeded.
•
Use the clamp only as specified in this instruction sheet; otherwise,
the protection provided by the clamp may be impaired.
•
Read the operating instructions before use and follow all safety
information.
•
CAT. III - Industrial Locations (IEC 1010-1).
PN 617677 September 1996, Rev.1, 4/97
1996, 1997 Fluke Corporation. All rights reserved. Printed in Thailand.