FT600 Instruction Sheet / 03/18/08
English Page 3
A
Connect the FT650 Fiber Probe to the display.
B
To ensure continuous operation, connect the ac
adapter whenever possible. The ac power LED (
)
lights when the ac adapter is connected. The LEDs
turn on from left to right as the battery approaches
full charge. The battery LED (
) lights when the
display is using battery power.
C
Screw an adapter tip onto the fiber probe to match
the connection you are inspecting.
Press the power key to turn on the display.
The LEDs indicate battery charge level for 5
seconds:
D
LEDs Battery
Charge
Level
75% - 100 %
50 % - 75 %
25 % - 50 %
1 % - 25 %
The power-down timer sets the time the
display stays on. To select a time, hold
down the contrast/timer key, then release
it when the desired LEDs light:
E
LEDs Power-down
Timer
15 seconds
30 seconds
60 seconds
Timer disabled
F
Turn the larger ring on the probe to focus the image.
Turn the smaller ring to change magnification.
G
Press the contrast/timer key briefly to
change the display contrast.
