Symbols
Risk of Danger. Important information. See
Instruction Sheet.
Do not dispose of this product as unsorted municipal
waste. Go to Fluke's website for recycling
information.
Conforms to relevant European standards.
Specifications
Electrical Specifications
Power connection
BC190 or BC430
Adapter requirement
17.8 V / 0.84 A
Input current limitter
714 mA
±
5%
Input voltage range
15 to 23 V
Batteries BP291
capacity 52
Wh
Charge time
5.5 Hours
Charge operating range
0 to 45°C (determined by battery)
Charge disable protection
(smbus controlled)
54°C
±
3°C battery temp
(determined by battery)
Charge disable protection
(hardware controlled)
58°C
±
3°C battery temp
(determined by battery)
General Specifications
Temperature:
Operating
Non Operating (Storage)
0
°
C to +45
°
C (determined by
battery)
-20
°
C to +60
°
C
Maximum Relative Humidity
Non Operating (Storage):
Operating:
0 ... 10
°
C
10 ... 30
°
C
30 ... 40
°
C
40 ... 45
°
C
No precipitating (noncondensing)
Recovery time two hours
No precipitation (noncondensing)
95
±
5 %
75
±
5 %
45
±
5 %
Emission and Immunity
EN-IEC-61326-1
(first edition 2005).
Height x Width x Depth
(excluding battery)
44 x 65 x 100 mm
Weight 85
g
Using the EBC290
To use the EBC290, follow these instructions (Refer to Figure
1):
1.
Connect the Power Adapter BC190 (or BC430) to a mains
outlet and insert the DC plug of the Power Adapter into the
External Charger.
1
3
4
2
Fig. 1
2.
Insert the battery to be charged into the External charger.
Take careful notice of the correct placement of the battery.
3.
Observe the green LED indicator:
- Slow flashing indicates that the battery is charging.
- Continuously on indicates that the battery is fully
charged.
- Fast flashing indicates a battery error.
4.
During the charging process the number of segments to
turn on in the battery display will increase over time. All
segments on indicates that the battery is charged to 100 %
of its present capacity.
Cleaning
Before cleaning, separate the product from Power Adapter and
Battery.
Clean the EBC290 with a damp cloth and a mild detergent. Do
not use abrasives, solvents, or alcohol.
Troubleshooting
In case of an error, the green LED in the Charger will flash at a
high rate which indicates a possible battery problem. When
available, insert another battery to determine is the error is
caused by the battery or by a defective charger.
All manuals and user guides at all-guides.com
