When to Replace the Jacks in the Adapters
11
How to Monitor the Number of Insertions for a Jack
To see the number of tests done with a patch cord adapter, attach the adapter
to the main tester, then tap
TOOLS
>
Version Information
>
ADAPTER
. These
counts show on the
VERSION INFORMATION
screen:
Autotest Count
is the number of Autotests done with the adapter.
Current Series
is an Autotest count that you can reset. Use this counter to
monitor the number of insertions for the jack. To reset the counter after you
replace a jack, tap
Reset Series
.
How to Order Replacement Jacks
Table 1 shows the replacement parts available for the DSX-PCxx Patch Cord
Adapters. To order replacement jacks, contact Fluke Networks as described on
page 2.
Replacement Parts
Table 1. Replacement Parts
Description
Fluke Networks
Model Number
Set of two shielded RJ45 Cat 6
A
test jacks
DSX-PCTAC6AKS
Set of two shielded RJ45 Cat 6 test jacks
DSX-PCTAC6KS
Set of two shielded RJ45 Cat 5e test jacks
DSX-PCTAC5EKS
Single DSX-PC6A Cat 6
A
adapter
DSX-PC6A
Single DSX-PC6 Cat 6 adapter
DSX-PC6
Single DSX-PC5E Cat 5e adapter
DSX-PC5E
