Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 402 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
366
How to Quickly Try Different OTDR Settings
After an OTDR test, you can quickly change some OTDR settings
when you want to try different settings on the same fiber. After
you do a test, tap
SETUP
on the
TRACE
screen, then select settings
on the
MANUAL OTDR
screen (Figure 150).
You can save your settings to the
Active
test setup or to a
New
test setup, or you can tap
TEST
to do a test without saving the
settings.
GPU220.EPS
Figure 150. Manual OTDR Screen for Quick Changes to Test Settings
A
C D E
B