Fluke CableAnalyzer DSX-5000, Technical Reference Handbook, Page: 400 / 700

Versiv Series Cabling Certification Product Family
Technical Reference Handbook
364
4
To make a new measurement, tap the yellow circle, tap
UNMARK
(  ), then do steps 1, 2, and 3 again.
GPU18.EPS
Figure 149. How to Use the Measurement Cursor on the ODTR Trace
Refer to Figure 149:
 To specify the start of a measurement, tap the yellow circle (  ),
then tap
MARK
.
 To see the
MARK
and
UNMARK
buttons, tap the yellow circle.

To move the cursor in small increments, tap or press and hold
or . If these buttons do not show, tap the yellow circle
on the cursor.
 The measurement in the square is the distance from the start
of the fiber to the yellow cursor.
G
A
D
F
C
B
E
K
I
J
H