Power
Main unit and remote: Lithium-ion battery pack, 7.4 V, 4000 mAh
• Typical battery life: 12 to 14 hours
• Charge time (with tester off): 4 hours (below 40 °C)
• AC adapter/charger, USA version: Linear power supply; Input 108 V ac to 132 V ac, 60 Hz ;
Output 15 V dc, 1.2 A
• AC adapter/charger, international version: Switching power supply; Input 90 V ac to 264 V ac,
48 to 62 Hz; Output 15 V dc, 1.2 A (isolated output)
• Memory backup power in main unit: Lithium battery
• Typical life of lithium battery: 5 years
• The battery will not charge at temperatures outside of 0°C to 45°C (32°F to 113°F).
The battery charges at a reduced rate between 40°C and 45°C (104°F and 113°F).
Languages Supported
English, French, German, Spanish, Russian and Italian
Calibration
Service center calibration period is 1 year
Performance Specifications
Note:
all specifications for tests on twisted-pair cabling apply to 100
Ω
cable. Contact Fluke Networks
for information on measurement performance for cable with a different impedance.
Baseline accuracy
The baseline accuracy of all DTX Series testers meets or exceeds the requirements of Level IV in
2nd Edition of IEC 61935-1 over the frequency range supported by the tester.
Category 6/Class E link
test modes (and lower link
categories)
DTX CableAnalyzer far exceeds Level III requirements of TIA/EIA-568-B.2-2 and IEC 61935-1
Length for Twisted Pair Cabling
(Length specs do not include the uncertainty of the cable’s NVP Value)
Parameter
Single-ended Test
Dual-ended Test
(Main and Remote)
Range
800 m (2600 ft)
150 m (490 ft)
Resolution
0.1 m or 1 ft
0.1 m or 1 ft
Accuracy
± (1m + 4%)
± (1m + 4%)
DC Loop Resistance Test
Parameter
Twisted Pair Cabling
Range
O
Ω
to 53
Ω
Resolution
0.1
Ω
Accuracy
± (1
Ω
+ 1%)
Overload Recovery Time
Less than 10 minutes to rated accuracy following over-voltage. Referencing is required after repeated or
prolonged over-voltage.
Delay Skew
Parameter
Twisted Pair Cabling
Range
0 ns to 100 ns
Resolution
1 ns
Accuracy
± 10 ns
