Fluke BT21ANG, User Manual

Page: 56 / 66

View Memory
View Profiles Saved in Sequence Mode
5
5-3
View Profiles Saved in Sequence Mode
To view measurement data that is saved in Sequence mode:
1. Turn the rotary switch to
VIEW memory .
2. Push
M
until MEMORY – SEQUENCE shows on the upper left corner of the display.
The Load profile menu shows on the display.
3. Use

and

to highlight a profile, and push the View softkey.
4. View the memory items, and push the Next softkey to view next page as required.
5. Use
1
to cycle through these four data sets: m
Ω
.V, Dis.V , VDC , VAC , Ripple ,
and Aux .
hsz065.jpg
Delete Profiles Saved in Sequence Mode
To delete data saved in Sequence mode:
1. Turn the rotary switch to
VIEW memory .
2. Push
M
until MEMORY – SEQUENCE shows on the upper left corner of the display.
3. When the View profile menu shows on the display, use

and
L
to highlight a
profile, and push the More softkey.
a. To delete only the highlighted profile, push the Delete softkey.
When the display shows Confirm to delete current profile? , push the Delete
softkey.
b. To delete all profiles, push the Delete all softkey.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct
.com