The table below is a list of symbols used on the product or in this
document.
Symbols
Symbol Meaning
Risk of Danger. Important information. See Manual.
Hazardous voltage
Double insulation
Battery
CAT II
Measurement Category II is applicable to test and
measuring circuits connected directly to utilization
points (socket outlets and similar points) of the low-
voltage MAINS installation.
CAT III
Measurement Category III is applicable to test and
measuring circuits connected to the distribution part
of the building’s low-voltage MAINS installation.
CAT IV
Measurement Category IV is applicable to test and
measuring circuits connected at the source of the
building’s low-voltage MAINS installation.
Conforms to European Union directives.
Conforms to relevant North American Safety
Standards.
Conforms to relevant South Korean EMC
Standards.
Conforms to relevant Australian EMC requirements.
This Product contains a lithium-ion battery. Do not
mix with the solid waste stream. Spent batteries
should be disposed of by a qualified recycler or
hazardous materials handler per local regulations.
Contact your authorized Fluke Service Center for
recycling information.
This product complies with the WEEE Directive
(2002/96/EC) marking requirements. The affixed
label indicates that you must not discard this
electrical/electronic product in domestic household
waste. Product Category: With reference to the
equipment types in the WEEE Directive Annex I,
this product is classed as category 9 "Monitoring
and Control Instrumentation” product. Do not
dispose of this product as unsorted municipal waste.
Go to Fluke’s website for recycling information.
