Fluke 9640A Series, Instruction Manual

Page: 149 / 324

SCPI Commands
SCPI Command Reference
4C
4C-13
SWEep Subsystem
Keyword Parameter Form
*RST
Condition
Notes
:SWEep
Command long form
This command node is only available
when the SWEEP instrument is
selected.
:SWE:STATe? n/a
Query only, this returns the current
state of the sweep: STOP, ARM, RUN
or PAUS
:SWE:TIME? n/a
Query only, this returns the duration of
the sweep
:SWE:DWELl[?] <NRf> 100 ms
Controls the amount of time spent at
each point during a sweep.
:SWE:SPACing[?]
<name>
{LINear |
LOGarithmic}
LIN
Selects which type of sweep is
performed.
:SWE:STEP[?] <NRf> 1.0 kHz
Selects the frequency for each step of
the sweep.
:SWE: SQUelch[?] <bool> OFF
Select / deselect Squelch during
transitions.
:SWE:PROGress? n/a
Query only to return how far through
the sweep is. This will report 0.0 if the
sweep has never started, and 100% if
it has completed.
:SWE:ACTion
<name>
{PAUSe |
CONTinue}
n/a
This will pause and continue a sweep
that is in progress. A settings conflict
will be reported if the sweep is not in
progress. There is no query form.