IR Thermometer
Overview
21
For Interval monitoring: The Product counts down from the time interval, wakes up
automatically and makes a measurement, and then saves the reading. The Product then goes
to sleep, restarts the count down and repeats the process. The feature automatically turns off
when the memory is full or you turn off the feature. To make repeated measurements at a
specified interval:
1. In HOLD status, push
SEL
for >3 seconds to enter in the second-level menu.
2. Push
SEL
until
AUTO CAPTURE
and
INTERVAL
show on the display.
3. Push
SET
to switch the feature on or off.
4. When the feature is on, push
or
to adjust the displayed value as necessary. The
displayed value is the start value of the countdown counter.
5. Push
SEL
several times or pull the trigger to exit the setup.
Note
•
If the Interval monitoring feature is turned on when Auto Capture is
already on, both features work together. The automatic measurement will
be at the time set for Auto Capture. This allows the user to select the
specified time to start the Interval monitoring measurement.
1.888.610.7664
Fluke
-
Direct
.com
Summary of Contents for 64 max
