Fluke 6102, User Manual

Page: 26 / 66

6102 Micro-Bath User’s Guide
Front Panel
18
Fan – The fan inside the calibrator runs continuously when the unit is being op erated
to provide cooling for the instrument. Slots at the top and around the two cor ners of
the calibrator are provided for air
À
ow. The area around the calibrator must be kept
clear to allow adequate ventilation. The air
À
ow is directed out the back.
Front Panel 7.2
Refer to Figure 2 on this page.
Controller Display – The digital display is an important part of the temperature
controller because it not only displays set and actual temperatures but also dis plays
various calibrator functions, settings, and constants. The display shows temperatures
in units according to the selected scale °C or °F.
6102 Front Panel Figure 2
Controller Keypad – The four button keypad allows easy setting of the set-point
temperature. The control buttons (SET, DOWN, UP, and EXIT) are used to set the
calibrator temperature set-point, access and set other operating parameters, and access
and set calibration parameters.
Setting the control temperature is done directly in degrees of the current scale. It can
be set to 0.01 degrees Celsius or Fahrenheit.
The functions of the buttons are as follows:
SET – Used to display the next parameter in the menu and to store parameters to the
displayed value.
DOWN – Used to decrement the displayed value of parameters.
UP – Used to increment the displayed value.
EXIT – Used to exit a function and to skip to the next function. Any changes to the
displayed value are ignored. Holding the EXIT button for approximately 0.5 seconds
exits back to the main display.
SET UP DOWN EXIT
200.00C
MICRO-BATH 35°C to 200°C 6102
1.888.475.5235 info@Fluke-Direct.com
Fluke-Direct
.com