Fluke 568 EX User Manual Download

Page: 15 / 25

Infrared

Thermometer

Display

Setup

From the Setup menu, the display language, backlight, and
time/date can be changed.

Language

To change the display language:

From the main menu, push the

Menu

softkey until

Setup

shows as the left softkey.

2. Push

the

Setup

softkey.

Use the down arrow softkey to move the indicator to

Language

, and push the

Enter

softkey.

Use the down arrow to move the indicator to the correct
language.

5. Push

the

Enter

softkey to complete the language selection, or

push the

Back

softkey to return to the Setup menu.

Backlight

The backlight is on by default. Turn the backlight off to conserve
battery power.

1. Push

the

Menu

softkey until

Setup

shows as the left softkey.

2. Push

the

Setup

softkey.

Push the

Enter

softkey to enter the backlight menu.

4. Push

the

OFF

softkey to turn the backlight off, or push the

softkey to turn it on.

5. Push

the

Back

softkey to return to the Setup Menu.

Summary of Contents for 568 EX


























Search results

Summary of Contents for 568 EX

Reviews:

Related manuals for 568 EX

Brands by name

Popular brands

Fluke 568 EX, User Manual

Search results

Summary of Contents for 568 EX

Reviews:

Related manuals for 568 EX

Brands by name

Popular brands